Filter
Top Products
AT-FH812u and AT-FH824u Software
24
Displaying
Repeater Statistics
Use the Repeater Statistics screen to display statistics for the 10 Mbps and 100
Mbps stack segments. These values can be used to indicate the approximate
loading for each segment, as shown in Figure 16 and defined in Table 17.
------------------------------------------------------------
Repeater Statistics
Refresh Statistics Auto-Refresh Statistics
Reset Counter
10M Segment 100M Segment
Frames : 1391288 1391288
Bytes : 1 0
Collisions : 267 0
Aligment Errors : 0 0
CRC Errors : 0 0
Total Errors : 6219780 6219780
<PREV_PANEL>
Refresh current statistics screen.
Use TAB or Cursor keys to move, <Enter> to confirm.
------------------------------------------------------------
Figure 16
Repeater Statistics Screen
Table 17
Repeater Statistics Parameters
Parameters Description
Refresh Statistics Refresh the displayed statistics.
Auto-Refresh Statistics Refresh statistics at the interval specified in Console Configuration.
Frames Number of frames passing through this device.
Bytes Number of bytes passing through this device.
Collisions Number of simultaneous node transmissions detected by this
device.
Alignment Errors Number of mis-synchronized data packets detected by this device.
CRC Errors Number of Ethernet Cyclic Redundancy Check errors detected by
this device.
Total Errors Total number of errors, including FCS, alignment, FramesTooLong,
ShortEvents, LateEvents, Jabber, and DataRateMismatches
detected on this device.