Filter
Top Products
Patch 89262-08 For AT-8900 Series Switches 13
Patch 89262-08 for Software Release 2.6.2
C613-10402-00 REV H
In certain cases where static routes in a multi-path environment were used
and routes were changed on the switch, the IPv6 flow table of the switch
wasn't refreshed correctly, i.e. an entry in the flow table had no outgoing
interface and ND entry. This issue has been resolved.
The command reset qos accel was generating an unexpected error message.
This issue has been resolved.
When a master VRRP router was configured from a bootup script, the
transition to the MASTER state occurred before the Layer 2 interface had
been initialised, preventing the gratuitous ARP from being sent. This issue
has been resolved.
The output of the show qos trafficclass=x command was not correctly
indicating the state of the parameter "Ignore BandwidthClass". This issue
has been resolved.
When LS Acks (Link State Advert acks) were received, they were compared
against the transmitted LSA (Link State Advert). If it was the same, the LSA
was removed from the re-transmission list. The algorithm used in this check
has been changed to be compliant with the algorithm specified in section
13.1 of RFC2328, to determine if the LS Ack received is the instance as the
LSA.
When the IPv6 Accelerator card was enabled in loopback mode, and you
used an SNMP management station to display the forwarding database, a
random value was displayed for one CPU MAC entry. This issue has been
resolved.
A problem existed when setting non-default Firewall attack trigger levels
for SMTP attacks. The show firewall policy attack output and dynamically
generated configuration scripts were incorrect. This issue has been
resolved.
When a private VLAN had a tagged uplink, and at least one untagged
private port, a configuration generated using the create conf command
would contain incorrect information. This issue has been resolved.
PCR: 40411 Module: IP6 Level: 2
PCR: 40413 Module: QOS Level: 3
PCR: 40415 Module: VRRP Level: 2
PCR: 40416 Module: QOS Level: 3
PCR: 40417 Module: OSPF Level: 3
PCR: 40418 Module: SWMX Level: 3
PCR: 40422 Module: FIREWALL Level: 3
PCR: 40425 Module: VLAN Level: 2