Filter
Top Products
16
If local codes permit, power to the dryer can be made by the use of a flexible U.L. listed power cord/pigtail
(wire size must conform to rating of dryer), or the dryer can be hard-wired directly to the service breaker
panel. In both cases, a strain relief must be installed where the wiring enters the dryer.
Electrical power connection examples.
IMPORTANT: For a 120v installation, a 2-wire service (L1 and Neutral) and a ground is required
*
.
In the case of a 208v or 230/240v 1-phase (1ø) service, 3-wires (L1, L2, and
Neutral) and a ground is required
*
.
* For each basket (tumbler)/pocket.