Filter
Top Products
25
SECTION IV
PREOPERATIONAL INSTRUCTIONS
A. COIN MODE
1. When at least one (1) of the dryer pockets is in the ready state and no cycle is in progress, the liquid crystal
display (L.C.D.) screen will read “Ready, Insert $XX.XX to Start”. If both pockets are idle, both sections
of the L.C.D. screen will read “Ready, Insert $XX.XX to Start”.
2. Insert coin(s). Once the correct “Amount to Start” has been inserted, the pocket will now display “SELECT
TEMP TO START”. If the other pocket was already in a cycle, that pocket will display “SELECT TEMP
TO ADD TIME”. If both pockets were idle, both pockets will display “SELECT TEMP TO START”.
3. Select temperature by pressing “HIGH,” “MEDIUM,” or “LOW” on the dryer pocket you wish to start the
cycle in. The cycle will start, and the L.C.D. will display the Dry Cycle selected and the remaining time.
4. The dryer will continue through the drying and cooling cycles until the vended time has expired.
5. Upon completion of drying and cooling cycles, the buzzer will sound and the dryer will go into Anti-Wrinkle
mode for 99 minutes or until the door has been opened.
B. FREE MODE
1. When the controller is in the ready state and no cycle is in progress, the liquid crystal display (L.C.D.)
screen will display “SELECT TEMP.”
2. Select temperature by pressing “HIGH,” “MEDIUM,” or “LOW.” The cycle will start and the controller
will display the Dry Cycle selected and the remaining time.
3. The dryer will continue through the drying and cooling cycles, until the drying time has expired.
4. Upon completion of the drying and cooling cycles, the buzzer will sound, and the dryer will go into
Anti-Wrinkle mode for 99 minutes or until the door has been opened.