Filter
Top Products
33
SECTION IX
PROCEDURE FOR FUNCTIONAL CHECK
OF REPLACEMENT COMPONENTS
1. Microprocessor Controller (Computer) Board
a. Upon completing installation of the replacement microprocessor controller (computer) board, reestablish
power to the dryer.
b. Start the drying cycle.
KEYBOARD (TOUCH PAD) LAYOUT
1. Liquid Crystal Display 6. Bottom Pocket LOW Key
2. Top Pocket LOW key 7. Bottom Pocket MEDIUM Key
3. Top Pocket MEDIUM Key 8. Bottom Pocket HIGH Key
4. Top Pocket HIGH Key 9. Bottom Pocket PAUSE Key
5. Top Pocket PAUSE Key
c. Verify that the motor(s), heat, and door indicator lights on the back side of the microprocessor controller
(computer) board are lit. (Refer to the illustration below.)