Filter
Top Products
®
®®
®
ADDENDUM
NetworkAIR ACPA4000
17
b. For Windows FTP clients, separate the port number from the IP
address by a space. For example, if the Network Management Card’s
FTP Server Port setting has been changed from its default of 21, such
as to 21000, you would use the following command for a Windows
FTP client transferring a file to a Network Management Card with an
IP address of 150.250.6.10.
ftp> open 150.250.6.10 21000
4. Log on using the Administrator user name and password. (apc is the
default for both.)
5. Upgrade the AOS. For example:
ftp> bin
ftp> put apc_hw02_aos_225.bin
6. When FTP confirms the transfer, type quit to close the session.
7. Wait 20 seconds, and then repeat step 2 through step 6 for the
application module. In step 6, use the application module file instead of
the AOS module.