Filter
Top Products
®
®®
®
ADDENDUM
NetworkAIR ACPA4000
23
Updating Configuration Settings
Methods
The Management Card stores its configuration settings internally. These
include TCP/IP, TFTP, SSL, SCP, FTP, Web, Device Manager, password,
and system settings.
To edit or update the configuration settings for the Management Card, use
Telnet, the Web interface, SNMP, or the Wizard.
Using Telnet or Web interfaces
Log on to either the Web interface or the control console of the NetworkAIR
PA Portable Air Conditioner. Any setting that can be edited can be changed
in these interfaces.
Using SNMP
Use SNMP to perform SETs. However, when you use SNMP, only settings
which have OIDs in the MIB defined as read-write can be edited.
Using the Wizard (summary)
For a detailed description of how to update the configuration
settings of one or more Management Cards, see Reconfiguring
deployed Network Management Cards. The following summary
does not include many of the available options.