Filter
Top Products
MX28B1200/2400 MX28B1200/4800 –48 VDC User’s Manual Page 40
PARAMETER NAME/
[MENU LOCATION]
DESCRIPTION DISPLAY SCREENS /
DEFAULT SETTINGS
FUSE 1 Blown
Security Level {1}
[MODULES/FUSE/SET-ALM]
•
•
•
FUSE 8 Blown
Security Level {1}
[MODULES/FUSE/SET-ALM]
The Output Relay that is energized when FUSE
Fuse 1 is blown.
•
•
•
The Output Relay that is energized when FUSE
Fuse 8 is blown.
FUSE 1 Alm m+
Major
•
•
•
FUSE 16 Alm m+
Major
Hardware Battery Current
Alarm
Security Level {2}
[SYSTEM/SET-ALM]
The output relay energized if there is a hardware
failure in the battery current monitoring function.
Hw Batt C Almm+
Minor
Hardware Battery Temperature
Alarm
Security Level {2}
[SYSTEM/SET-ALM]
The output relay energized if there is a hardware
failure in the battery temperature monitoring
function.
Hw Batt T Almm+
Minor
Hardware LVD Alarm
Security Level {2}
[SYSTEM/SET-ALM]
The output relay energized if there is a conflict
between the commanded and sensed positions of
the LVD contactor. Generally the contactor is
open when it should be closed.
Hw LVD Alm m+
Minor
Hardware System Temperature
Alarm
Security Level {2}
[SYSTEM/SET-ALM]
The output relay energized if there is a hardware
failure in the system temperature monitoring
function.
Hw Sys T Alm m+
Minor
Hardware System Voltage
Alarm
Security Level {2}
[SYSTEM/SET-ALM]
The output relay energized if there is a hardware
failure in the system voltage monitoring function.
Hw Sys V Alm m+
Minor
Input Relay 1
Security Level {1}
[SYSTEM/IN-RLY/RLY-MAP]
•
•
•
Input Relay 4
Security Level {1}
[SYSTEM/IN-RLY/RLY-MAP]
The Output Relay that is energized when an
external contact closure or opening at the Input
Relay 1 connection changes state.
•
•
•
The Output Relay that is energized when an
external contact closure or opening at the Input
Relay 4 connection changes state.
In-Rly 1 Alm m+
Ignore
•
•
•
In-Rly 4 Alm m+
Ignore
Input Relay 1 Alias
Security Level {1}
[SYSTEM/IN-RLY/ALIAS]
•
•
•
Input Relay 4 Alias
Security Level {1}
[SYSTEM/IN-RLY/ALIAS]
An alternate name (alias) can be assigned to Input
Relay 1 if desired.
•
•
•
An alternate name (alias) can be assigned to Input
Relay 1 if desired
In-Rly 1 m+
Input Relay 1
•
•
•
In-Rly 4 m+
Input Relay 4
Lamp Test
Security Level {1}
[SYSTEM/DIAG]
Setting Lamp Test to “ON” will turn on the
“MAJOR”, “MINOR”, “NORMAL”, “MAJ”, and
“MIN” LEDs on the control unit front panel.
Lamp Test m+
OFF