Filter
Top Products
1-8
Rear Panel Connectors and Circuit Breaker
The rear panel connectors for the S10 and S15 Power Conditioner are shown in
Figure 3. The only difference between the rear panels of the S10 and S15 is the S15
provides a coaxial cable splitter and jacks for Ethernet equipment surge-protection,
and a connector for an external Battery Pack (sold separately). Each numbered
callout corresponds to a numbered description in the list that follows Figure 3.
Figure 3. S15 Rear Panel Connectors, Indicator, and Circuit Breaker
All outlets provide surge protection, voltage regulation, noise filtering and pure sine
wave battery backup power.
SETUP Push Button
This pushbutton is used to advance the display through the various
user-selectable set up functions provided by the unit such as: Audible
Alarms, Sensitivity, Display Dimmer, LED Dimmer, Go To Bat If,
Outlet 1 & 2 Delay (in seconds), Low Bat Warning, Bat Rep Date,
and so on.
REGULATING Status Indicator
When lit (blue), it indicates automatic voltage regulation (AVR) is enabled
and operating to correct low or high voltage conditions.
DELAYED 2 Status Indicator
When lit (blue), conditioned power is being supplied to equipment
connected to the rear-panel outlets marked Delayed 2.
12
13
14
1 2 3 4 5
7
8
910
12
6
12
13
11