Filter
Top Products
2-4
3. Push the battery wire connector into the hole located to the left of the battery
pack, as shown in Figure 5. Ensure that the battery wire connector is pushed into
the hole, and securely connected by gently pulling on the wire to ensure it is
attached to the connector.
Figure 5. Battery Wire Connection
Caution: Failure to install the battery retaining bar can be hazardous.
4. Install the battery retaining bar.
5. Install the front bezel, as shown in Figure 6, by aligning the four pins located on
the back-side of the bezel with the holes at the left and right sides of the unit.
Gently push the front bezel into place.
Figure 6. Front Bezel Installation