Filter
Top Products
Preparation for Storage/Shipment General Information
1-2 MA24106A UG
1-6 Preparation for Storage/Shipment
Preparing the power sensor for storage consists of cleaning the unit, packing the inside with moisture-
absorbing desiccant crystals, and storing the unit in the recommended temperature environment. Please refer
to the data sheet for storage temperature recommendations.
To provide maximum protection against damage in transit, the power sensor should be repackaged in the
original shipping container. If this container is no longer available and the unit is being returned to Anritsu for
repair, please advise Anritsu Customer Service; they will send a new shipping container free of charge. In the
event neither of these two options is possible, instructions for packaging and shipment are given below:
• Use a Suitable Container: Obtain a corrugated cardboard carton. This carton should have inside
dimensions of no less than 15 cm larger than the unit dimensions to allow for cushioning
• Protect the Instrument: Surround the unit with polyethylene sheeting to protect the finish.
• Cushion the Instrument: Cushion the instrument on all sides by tightly packing urethane foam
between the carton and the unit. Provide at least three inches of dunnage on all sides.
• Seal the Container: Seal the carton by using either shipping tape or an industrial stapler.
• Address the Container: If the instrument is being returned to Anritsu for service, mark the address of
the appropriate Anritsu service center and your return address on the carton in one or more prominent
locations.