Filter
Top Products
®
®®
®
USER’S GUIDE
switched rack pdu
2
Initial setup
You must define three TCP/IP settings for the Switched Rack PDU before it
can operate on the network.
• IP address of the PDU
• Subnet mask
• IP address of the default gateway
The PDU does not provide power protection. Therefore, APC
does not recommend plugging a unit directly into any
unprotected power source, such as a wall outlet.
To configure the TCP/IP settings, see the Switched Rack
PDU Installation and Quick Start Manual, provided in PDF on
the APC Switched Rack Power Distribution Unit Utility CD
and in printed form.