APC VS 50 Power Supply User Manual


 
Magnum VS –48 Vdc User’s Manual Page 33
PARAMETER NAME/
[MENU LOCATION]
DESCRIPTION SETTINGS (Default
Settings in BOLD)
Rectifier Current Output Status
{Status Only}
[STATUS/RECT]
[ 状态 / 模块]
A display of the dc output current for the
individual rectifier. Scroll up or down to
select individual rectifiers.
Rectifier Current Output
Status Only
Rectifier Fan Fail Status
{Status Only}
[STATUS/RECT]
[ 状态 / 模块]
A display of the fan fail alarm for the
individual rectifier. Scroll up or down to
select individual rectifiers.
Rectifier Fan Fail Status
Only
Rectifier Fail Alarm (RFA)
Status
{Status Only}
[STATUS/RECT]
[ 状态 / 模块]
A display of the RFA alarm for the
individual rectifier. Scroll up or down to
select individual rectifiers.
Rectifier Fail Alarm Status
Only
System Current
{Status Only}
[STATUS/SYSTEM/
Parameters]
[状态 / 系统 /参数]
The total system output current
(calculated as the sum of the individual
rectifier output currents).
System Current Status
Only
System Temperature
{Status Only}
[STATUS/SYSTEM/
Parameters]
[状态 / 系统 /参数]
System temperature measured within the
controller.
System Temperature
Status Only
System Voltage
{Status Only}
[STATUS/SYSTEM/
Parameters]
[状态 / 系统 /参数]
Actual power plant output voltage
measured by the controller at the output
of the rectifiers. This is the same voltage
at the front panel test points of the
controller.
System Voltage Status
Only
Time Setup
[SETUP/SYSTEM/Time/Date]
[设置 / 系统 / 时/日]
System time stored in the controller.
Used as a date stamp in the event log.
Current Time
Time Status
[STATUS/SYSTEMTime/Date]
[状态 /系统 / 时/日]
Displays the current controller time. Time Status Only