Filter
Top Products
Troubleshooting No Raster Flowchart
(Continued)
- 18
No Raster Flowchart
(Continued)
Measure voltage at pin 8
(labeled 6.3V).
See Picture A.
Does
multimeter
read about
6 VDC?
Replace video
interconnect cable.
See Take Apart Chapter.
END
END
A
yes
no
Are
cable
and connectors
okay?
yes
no
1. Replace Main Deflection,
CRT/Video, Rear Fence.
See Take Apart chapter.
2.Adjust cutoff and white
balance. See Adjustments
Chapter.
Check interconnect cable and
connectors P-702, P-703 and
P-302. See Picture C.
B.