Filter
Top Products
iMac (17-inch Mid 2006/Late 2006) Take Apart — AC Power Inlet 100
Replacing the AC Line Filter
Install the AC power inlet on the rear housing screw mounts with three self tapping screws.
Install the power inlet ground cable to the chassis with a machine screw.
Route the power inlet cable beneath the chassis as shown in the photo above, and connect
it to the power supply.
Using EMI tape, securely tape the top and bottom edges of the AC power inlet to the rear
housing.
Replace the hard drive fan.
Replace the logic board.
Replace the optical board
Replace the hard drive.
Replace the speakers.
Replace the display panel.
Replace the lower EMI shield.
Replace the front bezel.
Replace the memory.
Replace the memory access door.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.