Filter
Top Products
iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Access Door 20
Removing the Access Door
Raise the stand and use a Phillips #2 screwdriver to loosen the two captive screws that
secure the memory access door. Remove the access door.
Replacing the Access Door
Make sure the memory ejector tabs are in the closed position before attaching the access
door.
Position the access door on the rear housing over the memory compartment.
Lift the stand out of the way.
Use a Phillips #2 screwdriver to tighten the captive screws.
1.
1.
2.
3.
4.