Filter
Top Products
iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 86
Replacing the Power Supply
Power Supply (661-4018)
WARNING: HIGH VOLTAGE
Position the power supply loosely in its mounting location.
Connect the power supply-to-AC power inlet cable. Tuck the cable beneath the chassis and
away from the hard drive bay.
Connect the power supply-to-logic board cable to the underside of the logic board.
Install the four power supply screws, starting with the machine screw in the lower right
corner of the power supply. Then install the other screws (see photo above for locations).
Replace the hard drive.
Replace the display panel.
Replace the lower EMI shield.
Replace the front bezel.
Replace the access door.
Power Supply (661-3780)
WARNING: HIGH VOLTAGE
Position the power supply loosely in its mounting location.
Connect the power supply-to-AC power inlet cable. Tuck the cable beneath the chassis and
away from the hard drive bay.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.