Filter
Top Products
iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Memory 22
Removing the Memory
Important: Always discharge static before you touch any parts such as the memory board. To
avoid generating static electricity, do not walk around the room until you have nished replacing
the memory.
Pull the two levers in the memory compartment toward you. Pull HARD! If a memory module
is installed in the slot, pulling the levers will dislodge it. Note: The levers are used to remove
memory not to install memory. . Always install memory with your ngers.
Set the memory modules aside.
1.
2.