Filter
Top Products
Then follow these steps:
1 Assemble the VCR, television, microphone, and cables you need.
Be sure to use a microphone designed for your model of the Macintosh, such
as the Apple PlainTalk Microphone.
You need the following cables (available at an electronics supply store):
m Video cable with S-video connectors or RCA plugs at each end. (If you’re
using a video cable with RCA plugs, you’ll also need the adapter cable for
composite video.)
m Audio cable with dual RCA plugs at one end and a 3.5-mm stereo miniplug
at the other end.
m A cable to connect your VCR to your television.
Use a cable with an RCA or S-video plug to connect the VCR to the
television. Do not use coaxial cable.
You can also use an all-in-one cable (with one video and two audio RCA
plugs at each end) if you attach appropriate adapters.
IMPORTANT
A Y-shaped adapter is supplied with the round microphone for
some models of the Macintosh. This adapter is not compatible with your
Power Macintosh.
2 Attach one end of the video cable to the Video In port on the VCR.
Follow the directions that came with the VCR.
Stereo miniplug
RCA
S-video
S-video
RCA RCA
S-video
Adapter for composite video
46
Chapter 3