Filter
Top Products
4 Use the Configure pop-up menu to choose a configuration method.
If you are connected using Ethernet, the pop-up menu looks like this:
If you are connected using AppleTalk (MacIP), the pop-up menu looks
like this:
What you do next depends on whether you are configuring your network
manually or automatically.
5If you are configuring your network connection manually, type the information provided
by your network administrator or Internet service provider into the appropriate boxes.
You must specify an IP address. You may also need to enter a subnet mask
number, router address, and other information.
6If you are configuring your network connection automatically, do one of the following:
m If you are using a BootP server or DHCP server, skip ahead to step 7. The
server usually provides all the configuration information needed by TCP/IP.
m If you are using a RARP server, you may need to type additional
information provided by your network administrator or Internet service
provider into the appropriate boxes. If so, enter the information now.
m If you are using a MacIP server, click Select Zone. In the dialog box that
appears, choose the zone that contains the MacIP server you want to use
and then click OK.
63
Connecting Your Computer to a Network