Filter
Top Products
19
USING THE PROJECTOR
This section describes how to use and make adjustments to the
projector. It also provides a reference to the remote and keypad
buttons and the options available from the on-screen menus.
Basic Image Adjustment
1
Make sure you have powered up your equipment in the right
order (page 16).
2
If the image doesn’t display completely, adjust the height and
tilt of the projector (page 20), zoom the image (page 20), or
center the image by adjusting its horizontal or vertical posi-
tion (page 32).
3
If the image is out of focus, rotate the lens to focus it (page 20).
4
If the image appears to shimmer or if it has blurry vertical
bars after you have adjusted the focus, turn Auto Image
(page 31) off and then back on to reset the automatic sync and
tracking. If that doesn’t clear up the image, adjust the sync
(page 32) and/or the tracking (page 32) manually.
5
If the colors don’t look right, adjust the brightness, contrast,
and tint (page 27), and color and color temperature (page 28.)