Filter
Top Products
23
Computer 1, 2 and 3
When you have more than one source (computer or video) con-
nected to the projector, select between them by pressing the but-
ton for the source you want.
NOTE: It takes a few seconds for
the projector to recognize a new
source. After the first time, the
source is recognized immediately.
Press
computer 1, 2,
or
3
to display your computer image or Lite-
Show Pro presentation.
Freeze
The
freeze
button halts, or “freezes” the projected image. Use this
button to freeze a frame of video (the video continues to run but
the projected image is frozen). You can also freeze an image from
a computer source on the screen, allowing you to perform other
operations on the computer without the audience seeing them.
Press
freeze
again when you want the image to return to normal.
Help
This displays the help information.
NOTE: For model 9000-INT: To
use video input, an optional video
board must be installed in the pro-
jector. Contact Boxlight for more
information.
Light
Press
light
to illuminate the buttons on the remote control. The
light goes off automatically 10 seconds after you press any
button.
Menu
Press
menu
to open the on-screen menus. Press
menu
again to
close the menus. When you close the menus, the projector saves
any changes you made. For more information about the on-
screen menus, see page 25.
Mute
Pressing the
mute
button silences the internal speakers. It also
silences any external speakers that are connected.
To return the volume to its previous setting, press
mute
again or
press either
volume
button.