Filter
Top Products
Paper Jams
Chapter 5: Troubleshooting ❖ 5-13
Stapl Fail H5-92
Power Off/On
The Staple Head did not switch ON within the specified time. Power OFF and
ON the printer.
Stapl Fail H5-93
Power Off/On
The Stapler Failed in the Front Corner position. Power OFF and ON the
printer.
Stapl Fail H5-94
Power Off/On
The Stapler Failed in the Front Straight position. Power OFF and ON the
printer.
Stapl Fail H5-95
Power Off/On
The Stapler Failed in the Rear Straight position. Power OFF and ON the
printer.
Stapl Fail H5-96
Power Off/On
The Stapler Ready Sensor did not go back ON after the staples were refilled,
or stapling was unsuccessful. Power OFF and ON the printer.
Stapl Fail H5-97
Power Off/On
The End Wall Sensor of the finisher did not go on ON or OFF within the
specified time. Power OFF and ON the printer.
Table 5.1 Paper Jam Messages
(continued)
Message Description/Corrective Action
Table 5.1 Page 7 of 7