Filter
Top Products
Using the Control Panel
3-22 ❖ User Guide
Ethernet Menu
(continued)
NetBEUI PDL
Sets the default emulation for the Ethernet NetBEUI interface.
NetBEUI Bin PS
Enables or disables the NetBEUI binary mode of PostScript.
AppSocket Enabl
Enables or disables the Ethernet AppSocket interface.
AppSocket PDL
Sets the default Print Description Language emulation for the
Ethernet AppSocket interface.
AppSocket Bin PS
Enables or disables the AppSocket binary mode of PostScript.
ETalk Enable
Enables or disables the Ethernet EtherTalk protocol.
HTTP Enable
Enables or disables the Ethernet HTTP Server protocol.
IP Address Res
Sets the method used to resolve (assign) the IP address,
including Sub Net mask and default gateway.
IP Address
Sets the four byte IP address. This item appears only if the IP
Address Res is set to static.
Sub Net Mask
Sets the four byte Sub Net Mask address. This item appears
only if the IP Address Res is set to static.
Default Gateway
Sets the four byte Default Gateway address.
Port Timeout
Sets the time for determining when to end an incomplete
print job and poll the next port in the polling sequence.
Speed
Sets the speed of the 10/100 Ethernet interface and whether
half or full duplex Ethernet. 10 MB is the default.
Table 3.6 Menu Options
(continued)
Menu Description and Items
Table 3.6 Page 8 of 13