Filter
Top Products
Chapter 6. Basic Setting
Asanté FriendlyNET FR1104-G User’s Manual 28
6.2 CHOOSE WAN TYPE
After clicking Change from the Basic Setting > Primary Setup screen, you will see this:
Choose from these Internet (WAN) types:
• Static IP Address. ISP assigns you a static IP address.
• Dynamic IP Address. Obtain an IP address from ISP automatically. This is the most
common configuration and the router’s default setting.
• Dynamic IP Address (Special). Select this if your ISP is Road Runner or Telstra BigPond.
• PPP over Ethernet. Some ISPs require the use of PPPoE to connect to their services.
• PPTP. Some ISPs require the use of PPTP to connect to their services.
After making a selection, a context-sensitive page will prompt you to complete information
specific to your Internet connection. The information on the following pages provides more
settings than the corresponding pages in the Setup Wizard.
Warning! You should have a comprehensive working knowledge of networking, the Internet and
TCP/IP before making any changes on the following pages. Improper configuration may
adversely affect your Internet connection.
A. Choose your WAN type and click Save to save your changes and proceed to the next
screen.
B. To abandon your changes and restore your last saved changes, click Cancel.
A B