Filter
Top Products
Chapter 9. Advanced Setting
Asanté FriendlyNET FR1104-G User’s Manual 70
9.6 ROUTING
The router supports dynamic and static routing for large networks with multiple routers and
subnets. If you have fewer than 255 clients (computers and devices) on the same network, skip
this section.
Routing tables permit you to choose the physical interface address for determining outgoing IP
packets. When you have a network with 2 or more routers and subnets, configure the routing
tables so that packets will follow the proper routing path and subnets can communicate with each
other.
• Dynamic Routing. Choose RIPv2 if you have 2 or more subnets in your network.
Otherwise, choose RIPv1 or Disable.
• Static Routing. You may manually define up to 8 routing rules. In the table, enter the
destination IP address, subnet mask, gateway and hop for each rule. You may selectively
enable or disable each rule.
After making changes, be sure to click Save.
To restore the last saved settings, click Undo.
To read on-screen information on this page, click Help.