Filter
Top Products
5-325-32
5-325-32
5-32
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
Setting the Stripe SizeSetting the Stripe Size
Setting the Stripe SizeSetting the Stripe Size
Setting the Stripe Size
To set the stripe size:
1. From the ULI RAID BIOS Setup utility menu, move the cursor to
Stripe Size Stripe Size
Stripe Size Stripe Size
Stripe Size then press <Enter>.
2. Use the up or down arrow keys to select a stripe size then press
<Enter>.
3. The stripe size is displayed beside the Stripe Size menu item.
TIP: TIP:
TIP: TIP:
TIP: For server systems, we recommend using a lower array block
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array block size for optimum
performance.
Drive Model Mode Capacity RAID Array/Type
Channel 0 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/JBOD
Channel 1 Master: XXXXXXXXXXX XXXXX MB
Channel 2 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/JBOD
Channel 3 Master: XXXXXXXXXXX SATA 2 XXXXX MB
Capacity RAID Type Stripe Size RAID Name
RAID Array A : XXXXX MB JBOD RAIDJ
RAID Array B :
RAID Array C :
5. Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press <Enter>. Do not use special characters or
symbols.
6. The utility displays the RAID Array settings at the bottom of the
screen.