Filter
Top Products
ASUS A8R32-MVP DELUXEASUS A8R32-MVP DELUXE
ASUS A8R32-MVP DELUXEASUS A8R32-MVP DELUXE
ASUS A8R32-MVP DELUXE
2-252-25
2-252-25
2-25
4.4.
4.4.
4.
Silicon Image Serial ATA RAID connectorSilicon Image Serial ATA RAID connector
Silicon Image Serial ATA RAID connectorSilicon Image Serial ATA RAID connector
Silicon Image Serial ATA RAID connector
(7-pin SATA_RAID2)(7-pin SATA_RAID2)
(7-pin SATA_RAID2)(7-pin SATA_RAID2)
(7-pin SATA_RAID2)
This connector is for a Serial ATA signal cable. It supports a Serial ATA
hard disk drive that you can combine with an external Serial ATA
3 Gb/s device to configure a RAID 0 or RAID 1 set through the
onboard Silicon Image SATA RAID controller.
If you intend to create a RAID configuration using this connector, set the
Silicon 3132 ControllerSilicon 3132 Controller
Silicon 3132 ControllerSilicon 3132 Controller
Silicon 3132 Controller item in the BIOS to [RAID Mode]. See
section “4.4.4 Onboard Devices Configuration” for details.
• Before creating a RAID set using Serial ATA hard disks, make sure
that you have connected the Serial ATA signal cable and installed
Serial ATA hard disk drives; otherwise, you cannot enter the Silicon
Image RAID utility and SATA BIOS setup during POST.
• Use this connector and an external Serial ATA box connected to the
external SATA port, if you want to configure a RAID 0 or RAID 1 set.
• The Serial ATA port multiplier and external Serial ATA box are
purchased separately.
DO NOT unplug the external Serial ATA box when a RAID 0 or RAID 1 is
configured.
A8R32-MVP DELUXE
®
A8R32-MVP DELUXE SATA RAID connector
SATA_RAID2
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND