Filter
Top Products
4-284-28
4-284-28
4-28
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
Hyper Transport ConfigurationHyper Transport Configuration
Hyper Transport ConfigurationHyper Transport Configuration
Hyper Transport Configuration
Allows you to configure the HT links.
HT Link Speed [Auto]
The HyperTransport link will run at this speed if it is slower than or
equal to the system clock and the board is capable.
Configuration options: [Auto] [200 MHz] [400 MHz] [600 MHz]
[800 MHz] [1 GHz]
CPU:RD580-NB HT Link Width [Auto]
The HyperTransport link will run at this width.
Configuration options: [Auto] [8 Bit] [16 Bit]
RD580 HT Link Three State [Disabled]
Configuration options: [Disabled] [Enabled]
RD580 HT Drive Strength [Auto]
Configuration options: [Auto] [Manual]
The following items appear when the
RD580 HT Drive StrengthRD580 HT Drive Strength
RD580 HT Drive StrengthRD580 HT Drive Strength
RD580 HT Drive Strength
item is set to [Manual].
HT Drive Strength Value [Level 0]HT Drive Strength Value [Level 0]
HT Drive Strength Value [Level 0]HT Drive Strength Value [Level 0]
HT Drive Strength Value [Level 0]
Configuration options: [Level 0] [Level 1] [Level 2]... [Level 31]
HT Receiver Comp. CtrlHT Receiver Comp. Ctrl
HT Receiver Comp. CtrlHT Receiver Comp. Ctrl
HT Receiver Comp. Ctrl
[Auto] [Auto]
[Auto] [Auto]
[Auto]
Configuration options: [Auto] [Manual]
HT Receiver Comp. Value [Level 0]HT Receiver Comp. Value [Level 0]
HT Receiver Comp. Value [Level 0]HT Receiver Comp. Value [Level 0]
HT Receiver Comp. Value [Level 0]
Configuration options: [Level 0] [Level 1] [Level 2]... [Level 31]
This item appears when the
HT Receiver Comp. Ctrl HT Receiver Comp. Ctrl
HT Receiver Comp. Ctrl HT Receiver Comp. Ctrl
HT Receiver Comp. Ctrl item is set to
[Manual].
RD580 HT PLL Control [Auto]RD580 HT PLL Control [Auto]
RD580 HT PLL Control [Auto]RD580 HT PLL Control [Auto]
RD580 HT PLL Control [Auto]
Configuration options: [Auto] [Low Speed] [High Speed]