Filter
Top Products
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-22-2
2-22-2
2-2
2.1 Chassis cover
2.1.12.1.1
2.1.12.1.1
2.1.1
Removing the coverRemoving the cover
Removing the coverRemoving the cover
Removing the cover
1. Use a Phillips screwdriver to remove the screw on each front end of
the top cover.
3. Firmly hold the cover and slide it
toward the rear panel for about
half an inch until it is disengaged
from the chassis.
4. Lift the cover from the chassis.
2. Loosen the two thumbscrews on
the rear panel to release the top
cover from the chassis.
ThumbscrewsThumbscrews
ThumbscrewsThumbscrews
Thumbscrews
1/2 inch distance1/2 inch distance
1/2 inch distance1/2 inch distance
1/2 inch distance