Filter
Top Products
ASUS AP1600R-E2 (BA2)ASUS AP1600R-E2 (BA2)
ASUS AP1600R-E2 (BA2)ASUS AP1600R-E2 (BA2)
ASUS AP1600R-E2 (BA2)
4-54-5
4-54-5
4-5
3.3.
3.3.
3.
USB device wake-up (3-pin USBPW12, USBPW34)USB device wake-up (3-pin USBPW12, USBPW34)
USB device wake-up (3-pin USBPW12, USBPW34)USB device wake-up (3-pin USBPW12, USBPW34)
USB device wake-up (3-pin USBPW12, USBPW34)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh,
power supply in reduced power mode).
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
2.2.
2.2.
2.
VGA Graphics controller setting (3-pin VGA_EN1)VGA Graphics controller setting (3-pin VGA_EN1)
VGA Graphics controller setting (3-pin VGA_EN1)VGA Graphics controller setting (3-pin VGA_EN1)
VGA Graphics controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard ATI Rage XL
video graphics controller. Set to pins 1-2 to enable the video graphics
controller.
NCLV-D
NCLV-D VGA Setting
VGA_EN1
Enable
(Default)
Disable
2
3
2
1
NCLV-D
NCLV-D USB device wake-up
USBPW12
(Default)
+5V +5VSB
12
23
USBPW34
(Default)
+5V +5VSB
12
23