Filter
Top Products
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-122-12
2-122-12
2-12
8. Secure the riser card to the
standoff.
9. Connect the cable(s) to the
card, if applicable.
6. Install the riser card bracket with
the card into the PCI-X slot on
the motherboard.
7. Make sure that the golden
connectors completely fit the
slot and the bracket aligns with
the rear panel.
5. Take note of the holes on the
riser card bay. The two pegs on
the riser card bracket should
match these holes to ensure
that the bracket is properly in
place.
Peg on the riserPeg on the riser
Peg on the riserPeg on the riser
Peg on the riser
card bracketcard bracket
card bracketcard bracket
card bracket