Filter
Top Products
Chapter 5: BIOS setup
5-24
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN device boot ROM.
Configuration options: [Disabled] [Enabled]
Onboard 1394 [Enabled]
Allows you to enable or disable the onboard IEEE 1394 controller.
Configuration options: [Disabled] [Enabled]
Onboard Promise Controller [Enabled]
Allows you to enable or disable the onboard Promise
®
RAID controller.
Operating Mode [IDE]
Allows you to set the RAID controller operating mode. This item is
configurable only when the Onboard Promise Controller item is set to
[Enabled]. Configuration options: [IDE] [RAID]
SuperIO Device
Serial Port 1 Address [3F8/IRQ4]
Serial Port 2 Address [2F8/IRQ3]
Allow you to select the serial port base addresses. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
EPP Mode Select EPP1.7
ECP Mode Use DMA 3
SuperIO Device
Item Specific Help
Set Base I/O address
for serial port 1.
Select Menu