Filter
Top Products
Chapter 2: Hardware setup
2-30
2.9 Cable connections
• The bundled system cables are pre-connected before shipment.
You do not need to disconnect these cables unless you will remove
pre-installed components to install additional devices.
• Refer to this section when reconnecting cables to ensure correct
cable connections.
2.9.1 Motherboard connections
Refer to the motherboard user guide for detailed information on the
connectors.
Standard cables connected to the motherboard
7. Front panel cable
8. Front panel audio
9. Chassis fan cable
10. SMBus cable to backplane
11. Front panel IEEE 1394 port
1. 8-pin 12V power
2. 24-pin ATX power
3. Primary IDE cable
4. Secondary IDE (optical drive)
5. Floppy disk drive
6. Chassis intrusion
2
1
5
4
6
10
11
7
8
9
3