Filter
Top Products
4-11
ASUS AP1720-E2 barebone server
7. Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2)
These Serial ATA connectors support SATA hard disks that you may
configure as a RAID set. Through the onboard Promise
®
PDC20319
RAID controller, you may create a RAID0, RAID1, or RAID0+1
configuration. Configure the onboard device and SATA items in BIOS
to use the RAID feature. Refer to page 5-26 and 5-27 for information.
8. Backplane SMBus connector (6-1 pin BPSMB1)
This connector allows you to connect SMBus (System Management
Bus) devices. Devices communicate with an SMBus host and/or other
SMBus devices using the SMBus interface.
NCCH-DL
®
NCCH-DL SATA RAID connectors
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA_RAID1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA_RAID2
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA_RAID3
SATA_RAID4
NCCH-DL
®
NCCH-DL SMBus connector
BPSMB1
1
I2C_4_CLK#
GND
I2C_4_DATA#
+5VSB
FAN_PWM