Filter
Top Products
4-9
ASUS AP1720-E2 barebone server
3. IDE connectors (40-1 pin PRI_IDE [blue], SEC_IDE [white])
This connector supports the provided UltraDMA/100/66 IDE hard disk
ribbon cable. Connect the cable’s blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray
connector to the UltraDMA/100/66 slave device (hard disk drive) and
the black connector to the UltraDMA/100/66 master device.
• Refer to the hard disk drive label or documentation when setting
the device as master or slave.
• Pin 20 on each IDE connector is removed to match the covered
hole on the UltraDMA cable connector. This prevents incorrect
orientation when you connect the cables.
4. GAME/MIDI connector (16-1 pin GAME1)
This connector supports a GAME/MIDI module. Connect the
GAME/MIDI cable to this connector. The GAME/MIDI port on the
module connects a joystick or a game pad for playing games, and MIDI
devices for playing or editing audio files.
NCCH-DL
®
NCCH-DL IDE connectors
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to pin 1.
SEC_IDE
PRI_IDE
PIN 1
PIN 1
NCCH-DL
®
NCCH-DL Game connector
GAME1
+5V
J2B1
J2CX
MIDI_OUT
J2CY
J2B2
MIDI_IN
+5V
J1B1
J1CX
GND
GND
J1CY
J1B2
+5V