Filter
Top Products
4-22
Chapter 4: BIOS Setup
4.4.3 Onboard Devices Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
OnBoard AC’97 Audio [Auto]
OnChip SATA BOOTROM [Disabled]
OnBoard Promise Controller [Enabled]
Operating Mode [Onboard IDE Operat]
OnBoard LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
OnBoard 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Parallel Port Address [Disabled]
Onboard Game Port [Disabled]
Onboard MIDI Port [Disabled]
USB 1.1 Ports Configuration [USB 8 Ports]
Allows you to set the number of USB ports to activate.
Configuration options: [Disabled] [USB 2 Ports] [USB 4 Ports]
[USB 6 Ports] [USB 8 Ports]
USB 2.0 Ports Enable [Enabled]
Allows you to enable or disable the USB 2.0 ports controller.
Configuration options: [Disabled] [Enabled]
VIA USB Device Function Enable [Disabled]
Allows you to enable or disable the VIA USB device controller.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices.
Setting to Auto allows the system to detect the presence of USB
devices at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps)
or Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full
Speed]
OnBoard AC’97 Audio [Auto]
[Auto] allows the BIOS to detect whether you are using any audio device.
If an audio device is detected, the onboard audio controller is enabled; if
no audio device is detected, the controller is disabled. Configuration
options: [Disabled] [Auto]