Filter
Top Products
2-222-22
2-222-22
2-22
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
2.2.
2.2.
2.
USB device wake-up (3-pin USBPW12, USBPW34,USB device wake-up (3-pin USBPW12, USBPW34,
USB device wake-up (3-pin USBPW12, USBPW34,USB device wake-up (3-pin USBPW12, USBPW34,
USB device wake-up (3-pin USBPW12, USBPW34,
USBPW56, USBPW78, USBPW910)USBPW56, USBPW78, USBPW910)
USBPW56, USBPW78, USBPW910)USBPW56, USBPW78, USBPW910)
USBPW56, USBPW78, USBPW910)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S3 and S4 sleep modes.
The USBPW12 and USBPW34 jumpers are for the rear USB ports. The
USBPW56, USBPW78, and USBPW910 jumpers are for the internal USB
connectors that you can connect to additional USB ports.
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system will not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
M2R32-MVP
®
2
1
(Default)
+5V +5VSB
2
3
USBPW910
3
2
2
1
+5V
(Default)
+5VSB
USBPW12
USBPW34
M2R32-MVP USB device wake up
3
2
21
+5V
(Default)
+5VSB
USBPW56
USBPW78