Filter
Top Products
4-244-24
4-244-24
4-24
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3.0] [4.0] [5.0] [6.0]
TRCD [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRAS [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK]...[18 CLK]
2T Mode [Auto]
Configuration options: [Auto] [Disabled] [Enable]
MCT Timing Mode [Auto]
Configuration options: [Auto] [Manual]
The following items appear when the MCT Timing Mode item is set to
[Manual].
TRRD [Auto]TRRD [Auto]
TRRD [Auto]TRRD [Auto]
TRRD [Auto]
Configuration options: [Auto] [2T] [3T] [4T] [5T]
TRC [Auto]TRC [Auto]
TRC [Auto]TRC [Auto]
TRC [Auto]
Configuration options: [Auto] [11T] [12T] [13T]...[26T]
MemClk Tristate C3/ATLVID [Disabled]
Enables or disables the MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Disabled]
Enables or disables the Memory Remapping around Memory Hole.
Configuration options: [Disabled] [Enabled]
Power Down Control [Auto]Power Down Control [Auto]
Power Down Control [Auto]Power Down Control [Auto]
Power Down Control [Auto]
Allows DIMMs to enter power down mode by deasserting the clock enable
signal when DIMMs are not in use. Configuration options: [Auto] [Disabled]
Bank Interleaving [Auto]
Sets to [Auto] or disables the Bank Memory Interleaving.
Configuration options: [Auto] [Disabled]