Asus M3N-HT Computer Hardware User Manual


  Open as PDF
of 178
 
4-16 Chapter 4: BIOS setup
4.3.6 SATA1/2/3/4
While entering Setup, the BIOS automatically detects the presence of Serial ATA
devices. There is a separate sub-menu for each SATA device. Select a device item
then press <Enter> to display the SATA device information.
The BIOS automatically detects the values opposite the dimmed items (Capacity,
Cylinder, Head, Landing Zone and Sector). These values are not

Only SATA 1–4 connectors support IDE mode. If you want to use SATA 5–6
connectors, set the SATA Operation Mode item to [AHCI] or [RAID]. Refer to
page 4-28 for more details.
Extended IDE Drive [Auto]


Access Mode [Auto]

F1:Help : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit : Select Menu Enter: Select SubMenu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Main
Select Menu
Item Specic Help
Selects the type of
xed disk connected
to the system.
SATA 1
Extended IDE Drive [Auto]
Access Mode [Auto]
Capacity 80 GB
Cylinder 0
Head 0
Landing Zone 0
Sector 0



Capacity

Cylinder

 previous next