Filter
Top Products
3-16
Chapter 3: BIOS setup
Chapter 3
DQS Sense Amplifier [Auto]
Reducing the value helps in overclocking and over-voltage.
Conguration options: [Auto] [+8] – [-6]
CMD Sense Amplifier [Auto]
Reducing the value helps in overclocking and over-voltage.
Conguration options: [Auto] [+8] – [-6]
DRAM Swizzling Bit 0 [Auto]
Set these items to [Enabled] to enhance overclocking capability.
Conguration options: [Auto] [Enabled] [Disabled]
DRAM Swizzling Bit 1-4 [Auto]
Set these items to [Enabled] to enhance overclocking capability.
Conguration options: [Auto] [Trained] [Enabled] [Disabled]
RAW MHz Aid [Auto]
Set this item to [Enabled] to help overclocking but compromises the system
performance.
Conguration options: [Auto] [Enabled] [Disabled]
IC Optimizer [Auto]
Set this item to [Enabled] to help overclocking when using Samsung IC memory
modules.
Conguration options: [Auto] [4GB Samsung] [4GB New Hynix] [4GB Old Hynix]
GPU.DIMM Post
Automatically detects and displays the information about the devices or memory installed on
the PCIe and DIMM slots. The eld shows N/A if there are no devices installed on the slots.
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line is dened by Intel
®
VRM specication and affects CPU power voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher load-line
calibration could get higher voltage and good overclocking performance but increases
the CPU and VRM thermal conditions.
Select from Level 1 to Level 8 to adjust CPU power voltage from 0% to 100%.
• The actual performance boost may vary depending on your CPU specication.
• DO NOT remove the thermal module. The thermal conditions must be monitored.