Filter
Top Products
5-38 Chapter 5: RAID configuration
6. Select Create new RAID-1 from the RAID-1 Build Option menu, then
press <Enter>. Refer to the options description below.
7. When prompted, use the keyboard to assign a name for the RAID 1
set, then press <Enter>.
8. If you want to make the array
bootable, select Yes from the
menu, then press <Enter>.
9. When prompted to create the
RAID 1 set, select <Yes>, then
press <Enter>.
The utility erases all data from the selected hard disk drives. Make sure
to backup all important data before creating a RAID set.
10. When a confirmation dialogue box
appears, select <Yes>, then press
<Enter>.
• Create a New RAID-1 - The default option. Select this option when
creating a new RAID 1 set.
• Copy from ( 0) to ( 1) - Select this option when you want to copy
the source drive contents to a target drive, provided that the
source is equal to or smaller than the target drive.
• Copy from ( 1) to ( 0) - Select this option when you want to copy
the source drive contents to a target drive, provided that the
source is larger than the target drive.