Filter
Top Products
5-48 Chapter 5: RAID configuration
5.4.9 Rebuilding a R AID set
2. Press <R>.
The rebuild option is available only for RAID 1 and RAID 10 sets.
To rebuild a RAID set:
1. From the main menu, select the RAID set you want to rebuild, then
press <Enter>.
While rebuilding the array, you can press <Esc> to stop. A pop-up menu
appears for confirmation. Select Yes to stop rebuilding and return to the
main menu.
A Build/Rebuild Completed message appears on screen to indicate
that you have successfully rebuilt the array.
3. Press any key to return to the main menu.