4-32 Chapter 4: BIOS setup
Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
Select Remote Access
type.
Configure Remote Access type and parameters
Remote Access [Enabled]
Serial port number [COM1]
Baudrate [19200]
Flow Control [None]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
VT-UTFB Combo Key Support [Disabled]
Meida Type [Serial]
The following items appear only when the Remote Access item is set to
[Enabled].
4.6 Server menu
The Server menu items allow you to customize the server features.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Sever Boot Exit
Configure Remote
Access.
Server Features
Remote Access Configuration
Remote Access Configu ration
The items in this menu allows you to configure the Remote Access
features. Select an item then press <Enter> to display the configuration
options.