Filter
Top Products
ASUS P/I-XP55T2P4 User's Manual 43
IV. BIOS SOFTWARE
(Power Management)
IV. BIOS
(Plug & Play / PCI)
ISA MEM Block BASE
This field allows you to set the base address and block size of a Legacy ISA card that
uses any memory segment within the C800H and DFFFH address range. If you
have such a card, and you are not using an ICU to specify its address range, select a
base address from the six available options; the ISA MEM Block SIZE field will
then appear for selecting the block size. If you have more than one Legacy ISA card
in your system that requires to use this address range, you can increase the block
size to either 8K, 16K, 36K, or 64K. If you are using an ICU to accomplish this task,
leave ISA MEM Block BASE to its default setting of No/ICU.
NCR SCSI BIOS
The default uses Auto settings for the onboard NCR SCSI BIOS (see section VI). If
you wish not to use the onboard NCR SCSI BIOS, choose Disabled
USB Function
This motherboard supports Universal Serial Bus (USB) devices but current operat-
ing systems do not. The default is set to Disabled until support disks and USB
devices are available in which time you can set this function to Enabled.