Filter
Top Products
ASUS P/I-XP55T2P4 User's Manual 47
IMPORTANT: If your hard drive was already formatted on an older previous
system, incorrect parameters may be detected. You will need to enter the cor-
rect parameters manually or use low-level format if you do not need the data
stored on the hard drive.
If the parameters listed differ from the ones used when the drive was formatted, the
drive will not be readable. If the auto-detected parameters do not match the ones
that should be used for your drive, do not accept them. Press the <N> key to reject
the presented settings and enter the correct ones manually from the Standard CMOS
Setup screen.
Save and Exit Setup
Select this option to save into the CMOS memory all modifications you specify
during the current session. To save the configuration changes, highlight the “Save
& Exit Setup” option on the main screen and then press the <Enter> key.
Exit Without Saving
Select this option to exit the Setup utility without saving the modifications you specify
during the current session. To exit without saving, highlight the “Exit Without Sav-
ing” option on the main screen and then press the <Enter> key.
IV. BIOS SOFTWARE
IV. BIOS
(Load Setup Defaults)
IV. BIOS
(Save & Exit)