Filter
Top Products
3-40
Chapter 3: BIOS setup
Chapter 3
xHCI Legacy USB Support [Enabled]
[Enabled] Your system supports the USB 3.0 devices in legacy operating systems.
[Disabled] Your USB 3.0 devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB3.0 devices at
startup. If any USB 3.0 devices are detected, the xHCI legacy USB support
is enabled.
EHCI Legacy USB Support [Enabled]
[Enabled] Your system supports the USB 2.0 devices in legacy operating systems.
[Disabled] Your USB 2.0 devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB 2.0 devices at
startup. If any USB 2.0 devices are detected, the xHCI legacy USB support
is enabled.
xHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an xHCI hand-off
feature.
[Disabled] Disables the xHCI Hand-off support.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled] Disables the EHCI Hand-off support.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.2.2 Motherboard layout for the location of the USB ports.