Filter
Top Products
3-46
Chapter 3: BIOS setup
Chapter 3
The following item appears only when you set the Network Stack to [Enabled].
Ipv4/Ipv6 PXE Support [Enabled]
This item allows you to enable/disable the Ipv4/Ipv6 PXE wake event.
Conguration options: [Disabled] [Enabled]
PXE boot wait time [0]
This item allows you to set a wait time to press ESC key to abort the PXE boot. You
can use the <+> or <-> keys to adjust the value. The values range from 0 to 5 seconds.
Media detect time [0]
This item allows you to set a media detect wait time to detect the media. You can use
the <+> or <-> keys to adjust the value. The values range from 0 to 5 seconds.