Filter
Top Products
1. Introduction
3
System Requirements
Consoles
Two VGA, SVGA, or multisync monitors capable of the highest resolution
that you will be using on any computer in the installation
Two USB keyboards
Two USB mice
Stereo microphone and stereo speakers (Optional)
Note: If you connect a DDC type monitor to the Local Unit, the monitor
that connects to the Remote Unit must be able to support the highest
video resolution that the DDC monitor can provide.
Computers
The following equipment must be installed on each computer that is to be
connected to the system:
A VGA, SVGA or multisync card
USB Host Controller and Type A USB Port
Cables
For optimum signal integrity and to simplify the layout, we strongly
recommend that you use the high-quality Custom USB KVM Cable that is
provided with this package.
Cat 5e cable is the minimum required to connect the local and remote
CE800
B units. Cable of a lesser standard will result in degraded video
signals. For best performance, we strongly recommend Cat 5e cable.