Filter
Top Products
3. Operation
27
Enable / Disable Hotkeys
In case a conflict occurs with programs running on the computer, you may wish
to disable the hotkey function. To disable the hotkey function do the following:
1. Invoke HSM (see page 25).
2. Press and release [X] [Enter].
Note: This procedure is a toggle between enabling / disabling the hotkey
function. To revert back to the original enabled status, invoke HSM,
then press and release the X and Enter keys again.
Keyboard Operating Platform
The CE800B's default configuration is for a PC Compatible keyboard operating
platform. If you have a Mac or a Sun on your installation, you can change the
keyboard operating platform as follows:
3. Invoke HSM (see page 25).
4. Press and release the appropriate Function key (see table).
Note: 1. The brackets indicate the keys you should press. Simply press the
indicated keys – do not type the brackets.
2. After completing a setting, you automatically exit HSM.
Key Operation
[F1] Sets the PC compatible keyboard operating platform for the port
that currently has the KVM focus.
[F2] Sets the Mac keyboard operating platform for the port that currently
has the KVM focus.
[F3] Sets the Sun keyboard operating platform for the port that currently
has the KVM focus.